Chevrolet G20 Van STL 3D Print Model

The Chevrolet G20 Van is an iconic American full-size panel van from the 1970s, faithfully recreated as a detailed high-poly 3D model ready for printing. The model features a complete exterior with accurate grille, round headlights, side-sliding door, rear barn doors with hinges, exterior mirrors, wiper arms, and hubcaps, plus an interior visible through the windshield. Multiple views confirm clean topology and subdivision-ready surfaces ideal for display models, dioramas, or scale collectors. Supplied as STL files in a single ZIP archive, ready to slice and print.

Print settings

FDM printing is recommended at 0.15–0.2 mm layer height with the van oriented on its side or undercarriage to minimize scarring on visible body panels. Enable supports for the mirror arms, wiper blades, door handles, and underside exhaust. An infill of 15–20% is sufficient for display purposes; increase to 40% or higher if structural rigidity is required. PLA or PETG are suitable materials; for a weathered or rusted finish (as shown in the render), priming with grey filler primer before painting is strongly advised.