Mitsubishi Lancer Evo X STL 3D Print Model

The Mitsubishi Lancer Evolution X is a highly detailed 3D printable model of the iconic Japanese performance sedan, captured in its final generation form with full exterior and interior geometry. The model includes precisely sculpted body panels, the signature front grille with intercooler vents, large rear wing, quad exhaust tips, detailed alloy wheels with brake calipers, and a fully modeled cabin featuring steering wheel, instrument cluster, gear shifter, and bucket seats. Suitable for scale display models, dioramas, or collector prints, the file is provided in STL format ready for slicing. The level of geometric detail makes it ideal for both FDM and resin printing depending on the desired output scale and fidelity.

Print settings

Resin printing (MSLA/DLP) is strongly recommended to capture the fine mesh grille, interior details, and panel lines faithfully; for FDM, use a 0.2 mm layer height or finer. Print the body shell oriented at a slight angle to minimize stair-stepping on curved surfaces, and use supports sparingly on the undercarriage and rear diffuser. An infill of 15–20% is sufficient for display pieces; increase to 40%+ if structural strength is required. PLA or ABS works well for FDM; standard photopolymer resin is preferred for the detailed interior and wheels.