Fiat Fiorino Panel Van 1988 STL 3D Print Model

The Fiat Fiorino Panel Van 1988 is a compact Italian light commercial van produced in the late 1980s, faithfully reproduced as a high-detail 3D model with fully separated components including body panels, interior cabin with seats and steering wheel, glazing, wheels, bumpers, and rear cargo box. The model is supplied as a multi-part STL assembly, optimized for scale printing at 1:18, 1:24, and 1:64, making it ideal for collectors, diorama builders, and RC enthusiasts. All parts are logically separated for easier painting and assembly, as shown in the exploded view. Files are delivered in STL format inside a ZIP archive.

Print settings

FDM printing is recommended for larger scales (1:18, 1:24) using PLA or PETG at 0.1–0.2 mm layer height; resin (MSLA/DLP) is preferred for the 1:64 scale to retain fine surface detail. Body panels and the cargo box should be printed flat or at a slight angle with minimal supports; small parts such as mirrors, door handles, and bumpers may require light tree supports. An infill of 15–20% is sufficient for non-structural parts; increase to 30–40% for the chassis and wheel assemblies. Sand and prime the body before painting to achieve a smooth finish on the characteristic flat panel surfaces.