McLaren P1 2014 STL 3D Print Model

The McLaren P1 2014 is one of the most iconic hybrid hypercars ever produced, and this highly detailed 3D model captures every aggressive aerodynamic element of the original, from the signature front splitter and dihedral doors to the large active rear wing and complex diffuser. The model includes a fully detailed interior with steering wheel, dashboard and racing seats, and is available in two versions: open (no windows/lights) and windowed with lights. Ideal for display scale models, dioramas or collector pieces, it is delivered as a print-ready STL file. All major angles are covered across ten rendered views.

Print settings

FDM printing is feasible for the overall body shell, but resin (MSLA/DLP) is strongly recommended to capture the fine surface details, thin aerodynamic fins and interior elements accurately. Print the body in an upright or slight rear-elevated angle to minimise support scarring on visible surfaces; the rear wing and diffuser fins may need separate printing and assembly. Use supports for overhanging elements such as the wing struts, side air intakes and front splitter. Recommended infill 15–20% with a fine layer height (0.1 mm or below for resin); ABS or ASA for FDM if rigidity is required.