Koenigsegg One:1 2014 STL 3D Print Model

The Koenigsegg One:1 2014 is one of the most extreme hypercars ever produced, boasting a 1:1 power-to-weight ratio and a top speed exceeding 440 km/h. This highly detailed 3D model captures the aggressive aerodynamic bodywork, massive rear wing, sculpted side intakes, five-spoke wheels, and full interior with steering wheel and dashboard. Suitable for display scale models at 1:18, 1:24, or 1:43, as well as detailed dioramas. Supplied as STL files ready for slicing, including both open-cabin and windowed/lights versions.

Print settings

Due to the extreme surface complexity — large flat panels, aggressive splitters, tall rear wing, and fine interior detail — resin printing (MSLA/DLP) is strongly recommended for best results. FDM is viable for larger scales (1:18 or bigger) with fine-tuned settings. Print the body shell in a nose-up or rear-up orientation to minimize supports on the bodywork surfaces. Use tree supports for overhanging aerodynamic elements such as the front splitter, rear diffuser fins, and wing endplates. Recommended infill: 15–20% for display pieces; 30%+ if structural rigidity is needed. PLA or ABS for FDM; standard or ABS-like resin for SLA.