/2016%20Ford%20GT%20LM%20GTE%20(d46ac634)-01-frontal-45.png "Ford GT LM GTE 2016 STL 3D Print Model")
/2016%20Jaguar%20F-Type%20Project%207%20(333a053c)-01-frontal-45.png "Jaguar F-Type Project 7 2016 STL 3D Print Model")
/2016%20Honda%20Fit%20DBA-GK3%20(17cc8516)-01-frontal-45.png)
/2016%20Honda%20Fit%20DBA-GK3%20(17cc8516)-02-trasero-45.png)
/2016%20Honda%20Fit%20DBA-GK3%20(17cc8516)-03-lateral.png)
/2016%20Honda%20Fit%20DBA-GK3%20(17cc8516)-04-frontal-45-otro-lado.png)
/2016%20Honda%20Fit%20DBA-GK3%20(17cc8516)-05-trasero-45-otro-lado.png)
/2016%20Honda%20Fit%20DBA-GK3%20(17cc8516)-06-superior.png)
/2016%20Honda%20Fit%20DBA-GK3%20(17cc8516)-07-frontal.png)
/2016%20Honda%20Fit%20DBA-GK3%20(17cc8516)-08-trasero.png)
/2016%20Honda%20Fit%20DBA-GK3%20(17cc8516)-10-interior-no-windows.png)
/2016%20Honda%20Fit%20DBA-GK3%20(17cc8516)-11-frontal-45-windows.png)
/2016%20Honda%20Fit%20DBA-GK3%20(17cc8516)-12-trasero-45-windows.png)
Honda Fit 2016 STL 3D Print Model
The designs are crafted professionally and by hand.
The file is adapted for most 3D printers.
Refund up to 7 days after placing your order.
The Honda Fit 2016 is a third-generation subcompact hatchback (GK3 chassis, DBA designation for Japan-market naturally aspirated version) known for its practical Magic Seat system and efficient 1.3 L i-VTEC engine.
Original price was: $ 10,00.$ 7,00Current price is: $ 7,00.
Description
The Honda Fit 2016 is a third-generation subcompact hatchback (GK3 chassis, DBA designation for Japan-market naturally aspirated version) known for its practical Magic Seat system and efficient 1.3 L i-VTEC engine. This 3D printable model captures the production body of the 2016 Fit and is suitable for scale display, diorama scenes, or RC bodyshell reference. The file is provided in STL format, ready for slicing and printing on desktop FDM or resin printers. No supports are pre-added, giving the user full control over print orientation and settings.
Print settings
FDM printing is recommended at 0.1–0.2 mm layer height for clean body panel surfaces; use a brim or raft to ensure adhesion of the wide, flat undercarriage. Orient the model roof-down or split body/chassis if your build volume is limited. An infill of 15–20 % with gyroid or grid pattern provides adequate rigidity for a display piece. PLA or PLA+ works well; ABS or ASA can be used if light post-processing (sanding, priming) is planned for a painted finish.
Specification
Overview
You may also like
BMW M3 E46 Custom Tuner STL 3D Print Model
BMW Vision M Next Concept STL 3D Print Model
Honda Accord Sport 2018 STL 3D Print Model
Jaguar F-Type R Coupe 2015 STL 3D Print Model
Jeep Wrangler Trailcat 2017 Concept STL 3D Print Model
Mercedes-Maybach S650 Pullman STL 3D Print Model
Nissan Pathfinder R53 STL 3D Print Model
Reviews
There are no reviews yet.