Rostselmash Torum 760 Combine Harvester STL 3D Print Model

The Rostselmash Torum 760 is a large axial-rotor combine harvester widely used in grain and corn farming across Eastern Europe and Russia. This highly detailed 3D print model features a full corn header with 10 row dividers, rear grain unloading auger, engine compartment with air filter and exhaust, and an interior cab with operator seat and steering wheel. Two model versions are included: one with transparent cab windows and lights, and a solid windowed variant, both delivered in STL format ready for slicing. Ideal for scale dioramas, agricultural display models, and tabletop collections.

Print settings

FDM printing is recommended for the main body and chassis; resin printing is advised for fine detail parts such as the corn header dividers, cab interior, and pipework. Print the main hull and grain tank flat on their largest face to minimize support usage; the corn header should be printed upright with light tree supports under the row points. Use a 15–20% infill with gyroid pattern for structural parts and 0.15–0.2 mm layer height for surface quality. PLA or PETG are suitable materials; avoid flexible filaments due to the thin header tines.