Bobcat S770 Skid Steer with Manure Fork STL 3D Print Model

The Bobcat S770 is a compact skid steer loader equipped with a heavy-duty manure fork attachment, faithfully reproduced as a high-detail 3D print model. The model captures the enclosed ROPS/FOPS cab, dual hydraulic lift arms, chunky agricultural tires, rear engine housing with cooling vents, and the full multi-tine manure fork with upper grapple — rendered from 10 orthographic and perspective views. Two cab variants are included: open-frame and windowed/lights version, along with fork-raised and fork-lowered poses, making it ideal for dioramas, scale models, and collector displays. Supplied as print-ready STL files inside a single ZIP archive.

Print settings

FDM printing is recommended at 0.15–0.2 mm layer height with PLA or PETG for structural parts. Print the main body upright and the fork assembly flat to minimise support needs; enable supports for the hydraulic arm undercuts and the cab roof overhang. An infill of 20–30 % gyroid is sufficient for display use; increase to 40 % if you plan to assemble moving parts. Sand and prime the fork tines after printing for a clean finish.