Opel Omega A Mk1 1987 STL 3D Print Model

The Opel Omega A Mk1 is a full-size European executive sedan produced from 1986, represented here in its 1987 specification with highly detailed exterior bodywork including the distinctive flush grille, rectangular headlights, period-correct GL badging, Opel-embossed hubcaps, and rear OMEGA/OPEL lettering. The model captures the clean aerodynamic lines of the first-generation Omega A, making it an excellent choice for scale display builds, diorama props, or automotive collection prints. Supplied as a ready-to-slice STL file inside a ZIP archive, suitable for both FDM and resin printing workflows.

Print settings

Resin printing (MSLA/DLP) is recommended to capture the fine surface details such as the grille slats, hubcap spokes, door handle recesses, and embossed badging; FDM at 0.1 mm layer height with a 0.4 mm nozzle is viable for larger display scales. Print the body upright or at a slight rear-down angle to minimise support contact on the hood and roof surfaces; use tree supports sparingly on the underbody and wheel arches. An infill of 15–20 % is sufficient for a solid display piece; PLA or ABS works well for FDM, standard grey resin for detail-critical prints. No scaling is specified in the file name, so verify dimensions against a known reference before printing a final version.