T-90 Main Battle Tank STL 3D Print Model

The T-90 Main Battle Tank is a third-generation Russian main battle tank developed from the T-72 family and widely used by the Russian Armed Forces. This highly detailed 3D model captures all key external features including the 125mm 2A46M smoothbore gun, Kontakt-5 explosive reactive armor blocks, Shtora-1 active protection system sensors, smoke grenade launchers, external fuel drums, commander’s remote weapon station, antennas, and fully detailed running gear with six road wheels per side and rubber-padded tracks. Supplied as a pre-sliced-ready STL archive (T-90_uv.zip), it is suitable for high-detail display models, dioramas, wargaming, and tabletop use at any desired scale. The model has been rendered from multiple angles to confirm geometric accuracy and print-readiness.

Print settings

Resin printing (MSLA/DLP) is strongly recommended to capture the fine surface detail of the ERA blocks, optical sensors, and track links. If printing in FDM, use a 0.2 mm layer height with supports enabled for the gun barrel, antennas, and any overhanging hull details. Orient the hull flat on the build plate and print the gun barrel separately at a slight angle to minimise layer lines. An infill of 15–20% is sufficient for display purposes; use ABS or PETG for added durability, or standard PLA for a clean detail finish.