Iveco Puma 6×6 Armored Personnel Carrier STL 3D Print Model

The Iveco Puma 6×6 is a wheeled armored personnel carrier developed for the Italian Army, used in both troop transport and reconnaissance roles. This highly detailed 3D mesh captures all key features of the vehicle: the sloped front glacis with protected headlight clusters, the 6×6 all-wheel-drive configuration, the rear crew door with vision port and handle, rooftop commander’s cupola, antenna mast, and external stowage fittings. The model is provided in mesh format (ZIP archive) suitable for FDM or resin 3D printing at any scale, from tabletop miniature to large display model. File format: mesh files included in Puma_6x6_Armored_Mesh.zip, ready for slicing.

Print settings

FDM printing is recommended for larger display scales (1:35 or bigger); resin printing is preferred for fine detail at smaller scales such as 1:72 or 1:100. Print the hull in an upright or slightly tilted orientation to minimize support scarring on the side panels. Supports are required under the cupola overhangs, wheel arches, and antenna mast. Suggested infill: 15–20% gyroid for hollow hull sections; use PLA or ABS for FDM, standard grey resin for tabletop scale.