Kenworth W900 Logging Truck STL 3D Print Model

The Kenworth W900 is an iconic American long-nose semi truck, modeled here as a fully detailed logging configuration complete with a stacked log load and a dedicated log trailer. This high-fidelity 3D model captures the classic W900 cab, twin chrome exhaust stacks, tandem drive axles, and a tri-axle log trailer with upright bunk stakes and tie-down chains. Ideal for display models, dioramas, and scale collecting, the set is delivered in STL format ready for slicing. Multiple viewing angles are included to showcase the cab detail, trailer chassis, and log bundle separately.

Print settings

FDM printing is recommended for the truck cab and trailer chassis using PLA or PETG at 0.15–0.2 mm layer height with 20–30% infill; the cab should be printed upright with supports enabled for the hood undercuts and exhaust stacks. Resin printing (MSLA/DLP) is strongly advised for the fine chrome trim details, grille slats, and mirror arms to achieve clean surfaces. The log bundle can be printed flat on the bed with minimal supports. Print the model in separate sub-assemblies and bond with CA glue for best results.